Super Clone Richard Mille 07-01 Diamond Dial Watch
$633.00 – $1,499.00
USD · Ask us about the available optionsSKU: 13
Ask about this watchProduct details
The diamond dial on this replica rm-07-01 diamond shifts the gem-setting focus from the case exterior to the movement side, creating a different kind of visual density compared to full pave models. Rather than covering the tonneau case in stones, this version concentrates diamonds around and across the dial area, framing the skeletonized movement with set stones that catch light through the sapphire crystal. Richard Mille’s approach to diamond dials treats the stones as an architectural element rather than pure decoration, integrating them into the movement bridges and mainplate visible through the open-worked face.
Technical Overview
- Reference: RM 07-01
- Case shape: tonneau (barrel)
- Case dimensions: approximately 45.66 x 31.4mm
- Dial: diamond-set skeletonized
- Crystal: sapphire, front and back
- Strap: rubber with deployant clasp
- Movement: automatic with micro-rotor
- Functions: hours, minutes
The gem-set areas on the dial coexist with visible mechanical components, so you see diamonds alongside gear trains and the micro-rotor in a single field of view.
Inside the Movement
The automatic caliber uses the same micro-rotor architecture found across the 07-01 line, keeping case thickness minimal while allowing the rotor to wind the mainspring through daily wrist movement. With a diamond dial version, the stones are set directly into structural components of the movement visible from the front. This creates a layered depth effect where mechanical parts and gemstones occupy the same visual plane. For a version that moves the diamonds to the outer case instead, consider the black rubber strap model as a baseline comparison. Both share the core architecture of the RM 07-01 family, but the placement of decorative elements changes each model’s character entirely.
What Sets It Apart
Most diamond watches put stones on the bezel and case, visible only from the outside. The RM 07-01 diamond dial inverts that convention by placing them where the movement lives. When you look at the watch face, you see both the mechanical escapement and the stone setting simultaneously. That duality is rare in any watch category and makes this variant one of the more distinctive entries in the 07-01 catalog. This replica rm-07-01 diamond captures that unconventional approach to gem-set watchmaking for anyone drawn to the intersection of horology and jewelry.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
Customer reviews
Store customer feedback. These screenshots are not a rating of this specific product.