Replica AP Royal Oak Offshore Tapisserie 26401RO.OO.A002CA
$1,099.00
USDSKU: APO-1021
Ask about this watchProduct details
This replica Royal-Oak-Offshore 26401RO black matches a rose gold case with a black tapisserie dial and black ceramic bezel, putting it in the same reference family as the gold-dial 26401RO but with a fundamentally different visual outcome. Where the gold-dial version leans warm and dressy, this black-dial variant channels the Offshore’s sport heritage more directly. The 44mm case retains every dimension of the standard Offshore chronograph, and the rose gold material catches ambient light along the brushed case flanks while the black bezel and dial absorb it. Audemars Piguet built the black-dial 26401RO for buyers who want precious metal without the matching-tone dial that typically accompanies it.
Technical Overview
- Case diameter: 44mm
- Case material: 18k rose gold
- Bezel: black ceramic, octagonal with hex screws
- Dial: black Mega Tapisserie with rose gold-toned markers
- Crystal: sapphire with anti-reflective coating
- Strap: black rubber
- Movement: automatic chronograph
- Functions: chronograph, date, small seconds
The rose gold applied hour markers and hands stand out against the black dial, giving the watch stronger legibility than same-tone gold-on-gold configurations.
Inside the Movement
The automatic chronograph caliber inside the 26401RO provides a column-wheel chronograph with flyback capability. Start, stop, and reset commands pass through the rectangular pushers flanking the crown. The 30-minute counter at 6 and the running seconds at 9 use recessed subdials with gold-toned hands that match the applied indices. Date displays through the aperture at 3 with a black disc that blends into the dial. Power reserve sits around 40 hours on a full wind. For more options in this lineup, the Offshore collection page shows every available configuration. If you prefer ceramic over gold, the 6405CE Forest Green offers a full ceramic approach.
What Sets It Apart
Black-dial rose gold Offshore watches sit at the intersection of statement and stealth. The precious metal announces itself through warmth and weight, but the black dial and bezel pull the visual temperature down. The result is an Offshore that works in evening settings where an all-black steel version might read too casual, and in daytime contexts where a gold-dial version might feel excessive. This replica Royal-Oak-Offshore 26401RO black bridges those two extremes with a contrast-driven two-tone personality.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
Customer reviews
Store customer feedback. These screenshots are not a rating of this specific product.